I am hoping someone can help me regarding a problem that I cannot access the Bios or Boot menu during start-up. This just started. My board is a DZ77RE-75K (see specs below of system). I am running Win8 64 using an Intel SSD drive. This seems to have just started. When I reboot it presents the menu options but fails to respond to any key presses. Instead it goes into this routine that says (can't get it all down in time so this is an approximate) "Intel Boot Agent GE v1.2.63 Establishing link ....Client Mac ADDR: 00224D49BE02...DHCP PXE-53 No boot File name received" and then it continues to go into another routine but reads slightly different. I have reset the bios and restored it using Intel's instructions "Recovery with USB Device" and it succeeds. I then shut down, replace the jumper, and power on. It then proceeds to go into that routine and will not respond to F2 or F10 for Bios or Boot. I would really appreciate any help. I did do a bunch of Windows updates last night and today. I installed them one by one and rebooted after each install. The result was that all but one installed successfully. It just did not install.
System Specs:
| Intel Core i7-3770K Quad-Core Processor 3.5 GHz 8 MB Cache LGA 1155 |
| Intel Desktop Motherboard LGA1155 DDR3 1600 ATX - DZ77RE-75K |
| Corsair Vengeance 16GB (2x8GB) DDR3 1600 MHz (PC3 12800) Desktop Memory (CMZ16GX3M2A1600C10 |
| Themaltake Smart M850W Power Supply |
| Intel Solid State Drive 180GB 520 Series |
| Barracuda 2 TB 7200 Internal Hard Drive |
| EVGA GeForce GT 640 2048MB GDDR3 Dual DVI, mHDMI Graphics Cards 02G-P4-2643-KR |
| Antec Sonata IV - ATX Mid Tower Case |
| LG GH24 Internal CD Super Multi DVD Rewriter |