Upgrading processor. Please Help
I have a intel core 2 CPU 6600 2.4 ghz processor, not sure what my best options are. Can I upgrade my current processor to an i5 or i7?Thanks
View ArticleZ87 Intel speedstep problem
Hello. On z87 motherboards (not one, many) I have problems with Intel SpeedStep on XP64 OS.All EIST options and C-states in BIOS are on, but after loading OS CPU runs always at maximum speed with turbo...
View ArticleNUC never reboot after updated to 0046 bios version
Hi, I update my NUC (DC3217IYE) with last bios from 42 to 46 (GKPPT10H.86A.0046.EB.EXE) Nuc restart, the flash system start and bios was successfully updated.And my nuc never restart..........
View ArticleDisplay Driver has stopped responding and has recovered
Hi. I know this question has been asked many times, but many are unanswered. I have a Dell Inspiron 1545, Window 7 64 bit. Just yesterday, my laptop kept blacking out, freezes and then unfreeze and...
View ArticleBIOS upgrade problem on DZ77GA-70K desktop board
I tried to upgrade my BIOS (0021) to actual version (0066). I was successfully download the express BIOS update tool, I started on Windows 7. After the reboot the computer switched on for about 10 sec...
View ArticleClik here to view.
Intel HD 4600 - graphic bug
Hello world, When I use integrated HD Graphics 4600 to play Microsoft Train Simulator (old game in english from 2001 patched 1.4), it gets some texture problems like this.(same problem like another...
View ArticleLost Sound after turning of TV (HD4600 HDMI + LG TV)
Hi, I have an Problem with my HTPC. The System is an fresh installed (no Upgrade from 8.0) Windows 8.1 (64 bit) System. Hardware: Asus H87M-Pro Board with latest Bios 0906...
View ArticleConnecting to Galileo via Linux Console
There are three methods for connecting to the Galileo via Linux console.Use the UART connector (the thing that looks like a headphone jack).The cable for this can be made by hand, or can be ordered.DIY...
View ArticleHard Disk Shutdown bug which drivers 12.x.x.xxxx in Z77
I'm getting a shutdown bug on a Z77 Chipset. (Gigabyte g1 sniper 3) Before my computer is shutting down i hear my harddrives just spinning on again before my PC is going off.They do not start...
View ArticleLaptop CPU upgrade from T7100 to T9500?
Hi all, I'm going to upgrade my laptop CPU just to give it a bit more power. I've currently got a T7100 installed in my MAXDATA ECO4511IW. Current Specs:OS = Microsoft Windows 7 Ultimate...
View ArticleWidi & Windows 8.1 problems
Hi, I have a Belkin Screencast adapter and an ASUS Zenbook UX31A.I have updated Windows 8 to Windows 8.1 and launched the latest Widi software to check the configuration. With Windows 8.1, it is no...
View ArticleDZ87-KLT75 BIOS Update Error
Hi Intel Team, After updating Management Engine to 9.0.30.**** I cannot update the BIOS to 446. Current BIOS Version is 346.Please give me advice how to update BIOS correctly or how to downgrade ME to...
View ArticleFan issue (D54250WYK)
I have a new nuc and it recently starting have in issue with the fan. It seems to run at a high speed for like 2 seconds then stop then start again at high speed for 5 seconds; followed by it seems...
View ArticleHD4000 Driver Installation brings Popup "Operating System not supported"
Hi, the auto driver update detection of the intel site proposed me an update for my HD4000. When i want to install it a popup appears that says "Operating System not supported". My OS is Windows 7...
View ArticleIntel Wireless 7260 or Intel® Centrino® Advanced-N 6235 on Sandy Bridge?
Hi guys, I'd like to ask the Intel community what Wireless card would be the best for my Laptop with a Sandy Bridge (i3-2348m) processor. I've tried to do some research but Intel like most other...
View ArticleCan I start a sketch that is stored on a USB drive?
Instead of buying an SD card, could I use an old usb thumb drive to store my sketch? If so, how do I start the sketch? Is it possible to start the sketch during bootup, just like one stored on an SD Card?
View ArticleMesh and ARDUINO
is there somebody who can explain thisi have create a small software with arduino which contains the mesh line given be the mesh web sitei can see my Galileo board with meshcentral, i can start the...
View ArticlePixellation while playing AVCHD videos at 1080p
Hello, I'm running OpenElect 3.2.4 on Intel NUC DCCP847DYE . While playing AVCHD Camcorder video at 1080p , I see lots pixellation on the video. Same Video when I play on my Zotac AD 12 with OpenElec,...
View ArticleUSB IR Reciever on DCCP847DYE
Hello, I have recently purchased NUC 847 and installed OpenElec 3.2.3. To controlled with Remote , I have installed HP USB IR receiver. However, I'm not able to turn on the NUC with Remote. It does...
View ArticleHow to include pre-defined library .h files in own .h files?
Hi, I want to extend the USBHost library to allow my Galileo to connect to a Lego Mindstorms NXT. I have written two files: nxt.h & nxt.cpp, attached.Obviously I have to use certain things that are...
View Article