Hello,
I have built three systems with DH61CR + CPU i5-2400 + 8GB RAM Kingston + VGA Asus Nvidia EN210. All three have the same problem:
Windows 7 64bit installed, all is working, EXCEPT, when I connect LCD monitor with DVI cable, system wont boot.
No POST, No video - monitor is in stanby all the time. System hangs right after poweron, no sound, no blinking, I have to hold the power switch or use hard-switch to power down the system.
BUT when I use D-SUB vga connection again, all is working fine!
MB: DH61CR, latest bios v48, AA g14064-204. CPU is the one without GPU so the discrete VGA is the only one available.
Cable: I have already tried about ten cables, all working fine on other systems.
Jan